BabyDan DesignerGate with 3 Extensions, Silver/Nature

Pressure Fit

With a BabyDan DesignerGate pressure fit safety gate, you can keep your little one safe from a stair, doorway, fireplace or area in the home. The gate has three extensions so you need wall cups when mounting the gate. The extensions make the gate very flexible and able to cover a wide area. You can easily mount the safety gate with the built in safety indicator that shows if you have mounted the gate correctly.

BabyDan DesignerGate with 3 Extensions, Silver/Nature


Type of mounting

Pressure Fit

Minimum Opening

88.4 cm

Maximum Opening

95.6 cm

Distance Between Bars



European FSC certified beechwood


Silver and natural

Item Number

# 54217-2793-01

Safety Standard

EN 1930 : 2011


Important! Read and follow these instructions carefully and keep for future reference
Warning: Incorrect installation can be dangerous
Warning: Do not use the safety barrier if any components are damaged or missing
Warning: The safety barrier must not be fitted across windows
Warning: If the gate is mounted with 2 and 3 extensions, never use without wall cups
Be aware of hazards associated with children using or climbing over the safety barrier. Never climb over the gate. Never allow children to swing on the gate
This safety barrier is for domestic use only
When fitted as instructed, between two clean structurally sound surfaces, this product conforms to EN 1930:2011
Always place the gate directly on the floor/stairs
If the safety barrier is used at the top of the stairs, it should not be positioned below the top level
If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible
Please not that this product not necessarily prevents accidents. Never leave your child unattended
This gate is designed for children up to 24 months. However, this guidance should be constantly monitored against your child’ own development, as individual children’s skills do develop at different ages
If mounting onto brick, drywall or other dissimilar surfaces, it may be necessary to mount a smooth surface such as a wooden batten on to the wall
If the gate is damaged or has been exposed to an accident, it must not be used again
Only use original parts for this product
The safety barrier has a manual closing system
Always check that the safety barrier is correctly closed and locked
The safety barrier should be checked regularly to ensure that it is secure and functioning in accordance with these instructions
This safety gate is made from wood and metal
Only clean using warm soapy water or a damp cloth. Do not use abrasive cleaners or bleach


  • Pressure fit safety gate with three extensions
  • Built in safety indicator to show when the gate is properly mounted
  • Opens both ways
  • Can be operated with one hand