Reduce A Gate Kit Large for BabyDan Pressure Safety Gate

You can use the Reduce A Gate Kit if you want to use your pressure fit safety gate for another opening in the home but the gate is too wide. This way, you can reduce your safety gate no matter which BabyDan pressure fit safety gate you have. All you need is included the package - even if your safety gate must be fitted with wall cups. Also available in a small edition.

Reduce A Gate Kit Large for BabyDan Pressure Safety Gate

Specifications

Material

Aluzinc

Item Number

# 500183

Safety Standard

EN 1930 : 2011

Warnings

Product information: Extensions are available separately, extensions are included with some models
Warning: Incorrect installation can be dangerous
Warning: Do not use the safety barrier if any components are damaged or missing
Warning: The safety barrier must not be fitted across windows
Be aware of hazards associated with children using or climbing over the safety barrier. Never climb over the gate. Never allow children to swing on the gate
This safety barrier is for domestic use only
When fitted as instructed, between two clean structurally sound surfaces, this product conforms to EN 1930:2011
Always place the gate directly on the floor/stairs
If the safety barrier is used at the top of the stairs, it should not be positioned below the top level
If the safety barrier is used at the bottom of the stairs, it should be positioned at the front of the lowest tread possible
Please note that this product not necessarily prevents accidents to happen. Never leave your child unattended
This gate is designed for children up to 24 months. However, this guidance should be constantly monitored against your child’s own development, as individual children’s skills do develop at different ages
If red indicator is visible after mounting, the barrier must not be used in this particular opening, as the opening is unable to withstand the minimum pressure required
If mounting onto brick, drywall or other dissimilar surfaces, it may be necessary to mount a smooth surface such as a wooden batten on to the wall
If the gate is damaged or has been exposed to an accident it must not be used again
Only use original spare parts for this product
The safety barrier has a manual closing system
Always check that the safety barrier is correctly closed and locked
When used at top of stairs take extra care to ensure that the barrier always is correctly installed
The safety barrier should be checked regularly to ensure that it is secure and functioning in accordance with these instructions
This safety gate is made from metal
Only clean using warm soapy water, or a damp cloth. Do not use abrasive cleaners or bleach
Important: If using adhesive pads clean surface with Isopropyl Alcohol before attaching the pads onto the surface. Do not clean with anything containing oil or soap
Important: Adhesive pads can only be used on smooth surfaces such as painted, lacquered or planed wood or smooth metal surfaces. Adhesive pads cannot be used on glass, brick wall, tapestry, wallpaper or other loose surfaces / materials
Important: The screws provided are only intended for fixing into wood. If fixing into other material, use appropriate screws and wallplugs. (diameter = 4 mm)
Warning: If the width of the safety gate exceeds 92,5 cm, Never use without wall cups. Place either adhesive pads between wall cups and wall/door frame or screw in wall cups according to markings

Features

  • Contains 4 x 192 mm. tube + 2 x 127 mm. tube.
  • Used for reducing a pressure fit safety gate
  • Reduce A Gate kit large
  • Everything you need is in the box
keyboard_arrow_up